#Western digital wd10eads jumper 6 and 6 serial#
Western Digital Caviar Green WD10EARS Hard Drive - 1 TB - 5400 rpm - Serial ATA/300 - Serial ATA - 3. Everything seemed to work fine, but I realised that at standard bios settings the memory would only run at 1066 mHz. Western Digital WD10EADS not detected and spin down January 9th, 2012, 16:27 I have split this post into a few sections as it is quite long, but I wanted to give anyone willing to help as much information as I can. These instructions also apply to 3.0 (SATA II) drives, setting the PHY meaning they will be limited (downgraded) to SATA I (1.5 Gbps) communication. alternative jumper settings western digital 6 and 10 pin. While totally unnecessary in everyday life, jumpers still need fiddling on modern S-ATA drives in some very peculiar, abstract, out of the ordinary (read this as “on an ancient motherboard”) usage scenarios.īelow are the jumper positions on modern-day S-ATA Western Digital drives enabling various options – the most important of which is SATA Compatibility Mode: Western Digital RE4 WD1003FBYZ 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5' Enterprise Internal Hard Drive - 5 Year Warranty Western Digital RE4 WD1003FBYX 1TB 7200 RPM 64MB Cache SATA 3.0Gb/s 3. And they did this – yes! – using jumpers. Well, almost…Įarly SATA controllers had peculiar ways of functioning so manufacturers implemented failsafe/compatibility options in their later generation drives to make sure these newer drives are still usable on old boards. (Almost all manufactures keep the jumper setting on the top of the drive on the label) Western Digital: If you look at the green board you will see that near those pins there are labels CS. Not having the necessary jumper or not knowing their proper placement made the difference between a functional hard drive and one not getting recognized by the computer.įortunately, jumpers disappear in the S-ATA age. Jumper Settings Western Digital Serial ATA hard drives ship from the factory with a jumper shunt in the Default position (across pins 1 and 2). If you change the setting of jumper 7 - 8, you will lose all previous data and the. Jumper block: 8-pin (no Master/Slave settings) 10-pin (single, Master, Slave, and cable select (CSEL.
Western Digital WD10EADS Caviar Green 1TB SATA 3Gb/s Hard Drive.
Hard disk jumpers where a necessary nuisance in the IDE/(P-)ATA days. SPECIFICATIONS Western Digital WD10EADS Caviar Green 1TB SATA.
0 kommentar(er)
